| General |
| Label | Ubiquiti Switch EdgeSwitch Lite 48P 1Gbit, 4x SFP #5.1 |
| Status | N1 |
| Device Type | Switch - 48 ports - L3 - Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000 + 2 x Gigabit SFP / 10 Gigabit SFP+ + 2 x SFP |
| Performance | Non-blocking switching capacity: 70 Gbps
Switching capacity: 140 Gbps
Forwarding performance: 104.16 Mpps |
| Capacity | VLANs supported: 255
ACL rules: 100
LAG groups: 6 |
| MAC Address Table Size | 8K entries |
| Jumbo Frame Support | Yes |
| Routing Protocol | Static IP routing, policy-based routing (PBR) |
| Remote Management Protocol | SNMP 1, SNMP 2, Telnet, SNMP 3, HTTP, SSH-2, CLI |
| Features | Flow control, BOOTP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, STP support, RSTP support, MSTP support, DHCP snooping, ACL support, QoS, RADIUS support, UDLD, LLDP support, LACP, GVRP, CoS, GARP |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ac, IEEE 802.1s, IEEE 802.3ak, IEEE 802.1ab (LLDP) |
| Status Indicators | Port transmission speed, link/activity |
| Expansion / Connectivity |
| Interfaces | 48 x 1000Base-T RJ-45
2 x Gigabit / 10Gbit LAN SFP+
2 x 1000Base-X SFP
1 x console RJ-45 |
| Power |
| Power Device | Internal power supply |
| Voltage Required | AC 120/230 V (50 - 60 Hz) |
| Power Consumption Operational | 56 Watt |
| Miscellaneous |
| Compliant Standards | IC, FCC, ETSI 300 019 |
| Dimensions & Weight |
| Width | 44.3 cm |
| Depth | 28.6 cm |
| Height | 4.3 cm |
| Weight | 3.56 kg |
| Environmental Parameters |
| Min Operating Temperature | -5 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% (non-condensing) |
|